Product ID:FAIRING STRIP D
MSDS Date:04/29/1987
FSC:2090
NIIN:LLHQDD746
MSDS Number: BSGNK

GOODYEAR TIRE & RUBBER CO

1144 E MARKET ST
AKRON, OH 44316-0001
US

Emergency Phone: 216-796-2121;800-424-9300(CHEMTREC)

Info Phone: 216-796-1906

Cage: DO805

GOODYEAR TIRE AND RUBBER CO

AKRON, OH 44316-0001 US

Telephone: 330-796-1906/613-996-66669(CANADA)

Cage: 73842

LEAD (SARA III)

CAS: 7439-92-1

RTECS: OF7525000

Fraction By Weight: 3-8%

OSHA PEL 0.05 MG/M3

ACGIH TLV: 0.15 MG/M3 DUST

EPA Report Quantity: 1 LB

DOT Report Quantity: 1 LB

LD50 LC50 Mixture:NOT ESTABLISHED.
Routes of Entry: Inhalation:NO Skin:YES Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE:NONE KNOWN; NONE EXPECTED. THIS
IS A CURED RUBBER MATL. THE CHEMICALS ARE BOND IN FINISHED PROD.
HOWEVER, GRINDING, BUFFING OR MILLING OF THIS MATL MAY RESULT IN
THE RELEASE OF LEAD CONTAINING M ATL. NOTE:LEAD APPEARS ON NAVY
LIST OF OCCUP CHEM REPRO HAZARDS. SEEK CONSULTATION FROM APPROP
(EFTS OF OVEREXP)
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:HLTH HAZ:HLTH PROFS CONCERNING LATEST HAZARD
LIST INFO & SAFE HANDLING & EXPOS RECOMS . CHRONIC:NONE KNOWN.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

First Aid:INGEST:CALL MD IMMEDIATELY . INHAL:REMOVE TO FRESH AIR.
SUPPORT BREATHING (GIVE O*2/ARTF RESP) . EYES:IMMEDIATELY FLUSH
W/POTABLE WATER FOR A MINIMUM OF 15 MINUTES, SEEK ASSISTANCE FROM
MD . SKIN:FLUSH W/COPIOUS AMOUNTS OF WATER. CALL MD .

Extinguishing Media:WATER, ALL PURPOSE (ABC) DRY CHEMICAL, CO*2 OR
FOAM.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA & FULL
PROTECTIVE EQUIPMENT . DURING EMERGENCY CONDITIONS, OVEREXP TO
THERMAL DECOMPOSITION PRODUCTS MAY CAUSE HLTH HAZARDS.
Unusual Fire/Explosion Hazard:HCL GENERATED BY THERMAL DECOMPOSITION.
THIS MATL WILL BURN IF EXPOSED TO OPEN FLAME EMITTING ACRID & TOXIC
FUMES.

Spill Release Procedures:RECYLE OR REUSE MATERIAL.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling and Storage Precautions:NO SPECIAL PRECAUTIONS REQUIRED.
Other Precautions:NONE SPECIFIED BY MANUFACTURER.

Respiratory Protection:IF GRINDING, BUFFING OR MILLING THIS MATERIAL,
NIOSH/MSHA APPROVED RESPIRATORY PROTECTION SHOULD BE WORN.
Ventilation:IF HEATED PROVIDE ADEQUATE VENTILATION IN ORDER TO REMOVE
SMOKE & FUMES FROM WORK AREA.
Protective Gloves:IMPERVIOUS GLOVES .
Eye Protection:SAFETY GLASSES WITH SIDESHIELDS.
Other Protective Equipment:NONE SPECIFIED BY MANUFACTURER.
Work Hygienic Practices:PRACTICE GOOD PERSONAL HYGIENE.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.

HCC:N1
Spec Gravity:1.18
Solubility in Water:INSOLUBLE
Appearance and Odor:BLACK SOLID; NO ODOR.

Stability Indicator/Materials to Avoid:YES
NONE KNOWN; NONE EXPECTED.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:OXIDES OF CARBON, HCL, LEAD OXIDE.

Waste Disposal Methods:PRIOR TO DISPOSAL, TEST FOR EP TOXICITY (EPA
SW-846) & THEN INCINERATE I/A/W ALL APPLICABLE FEDERAL, STATE &
LOCAL ENVIRONMENTAL CONTROL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.